Products
Cutting tools, cutting tool engineering, cutting tool manufacturers, cutting tool supply, cutting tools inc
cutting tools India, cutting tools manufacturer, cutting tools manufacturers, taper reamers manufacturers
taper pin reamers manufacturers, taper pipe reamer manufacturer, taper pin reamer manufacturer
  A. Automatic High Speed Double Stroke Cold Heading Machines
   
 
.
These cold heading machines are fully automatic and easy to operate with little training, fitted with Solid Die to produce blank for Bolts, Screws, Rivets and other similar components. Cut off and knock out mechanism have safely devices that will stop any major accident if any abnormal function occurs in machines.
  .............
.
A positive knock out provision had been made on the 1st and 2nd punches to eliminate the possibility of parts sticking to these punches during the operations. The maximum parts of the machines are ground and all the Cames and Rollers  from H.C.H.C. ( Hardened & Ground ).
  .............
.
Model SICH-B5 & SICH-B6 equipped with Pneumatic Clutch & Automatic Centralized Lubrications systems provides sufficient quantity lubricating to all bearing surface.

Specification :
Model No.
SIBC-6
SIBC-8
SIBC-10
SIBC-12
SIBC-16
SIBC-20
SIBC-25
Dia. of Bolt
(MM)
3 - 6.3
4 - 8
5 - 10
6 - 12
8 - 16
10 - 20
15 - 25
Length of Bolt
(MM)
6 - 50
7 - 65
10 - 75
20 - 100
25 - 125
30 - 150
75 - 200
Output
(Pcs. / Min.)
90 - 100
80 - 90
65 - 70
55 - 60
50 - 55
40 - 45
35 - 40
Main Motor Rq.
(H.P.)
5
7.5
10
20
25
30
40
   
   
  B. Automatic Bolt Head Trimming & Shank Reducing Machines
   
.
These machines are very simple in operation, with latest improved design for mass production and lowest maintenance cost.
  .............
. New design knock out system helps to produce flange bolts and reducing the studs.
  .............
.
The maximum parts of the machines are ground and all the Cames and Rollers  from H.C.H.C. (Hardened & Ground ).

Specification :
 
Model No.
SIBH-6
SIBH-8
SIBH-10
SIBH-12
SIBH-16
SIBH-20
SIBH-25
Dia. of Bolt
(MM)
3 - 6.3
4 - 8
5 - 10
6 - 12
8 - 16
10 - 20
15 - 25
Length of Bolt
(MM)
6 - 50
7 - 65
10 - 75
20 - 100
25 - 125
30 - 150
75 - 200
Output
(Pcs. / Min.)
95 - 105
90 - 100
65 - 70
55 - 60
50 - 55
40 - 45
35 - 40
Main Motor Rq.
(H.P.)
5
5
7.5
10
15
20
30
   
   
  C. Automatic Thread Rolling Machines (High Speed)
   
 
These machines are designed for mass production and lowest maintenance cost.
  .............
Suitable for threading bolts, automobile parts and other similar components.
  .............
Two flats dies used in these machines, which easily fitted and adjusted.

Specification :
Model No.
SIBT-6
SIBT-8
SIBT-10
SIBT-12
SIBT-16
SIBT-20
SIBT-25
Dia. of Bolt
(MM)
3 - 6.3
4 - 8
5 - 10
6 - 12
8 - 16
10 - 20
15 - 25
Length of Bolt
(MM)
6 - 50
7 - 65
10 - 75
20 - 100
25 - 125
30 - 150
75 - 200
Output
(Pcs. / Min.)
95 - 105
90 - 100
70 - 75
65 - 70
50 - 55
40 - 45
35 - 40
Main Motor Rq.
(H.P.)
5
5
10
15
20
25
30
   
         
   
   
..........
All Specifications are subject to change towards improvements without any prior notice.